Rollbar help
11-26-2014, 05:14 PM
#1
MFz Lurker
Thread Starter
Join Date: Mar 2014
Location: Columbia, Pa
Posts: 31
Rollbar help
Okay I recently bought a Harddog roll bar and installed it but I haven't been able to install the harness bar that comes with the bar. I also would like to re install the OEM seatbelts till I can find a good set of 5 point harness and seats, the issue is the bar wont fit and neither will the seat belts. I have the bar itself is mounted to the seatbelt tower and the bolt on the bottom of the tower match to the plate with the roll bar. heeeellppppp 
12-02-2014, 12:22 PM
#3
Moderator
Join Date: Jul 2011
Location: Tampa, FL; Lake Jackson (Atlanta), GA
Posts: 1,902
The directions. Download them. http://www.bethania-garage.com/install_instructions.htm
The seatbelt guide bolts to the front eye on the bar. The belt reel remains in its stock location with the top bolt removed so that the reel can tilt inboard slightly at the top.
The seatbelt guide bolts to the front eye on the bar. The belt reel remains in its stock location with the top bolt removed so that the reel can tilt inboard slightly at the top.
Last edited by sixshooter; 12-02-2014 at 12:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post