1.6l t3 60 dyno
 

Figured I'd post my first dyno atleast

http://img716.imageshack.us/img716/5...ture001mjv.jpg
By techsalvager at 2011-04-23

T3 60
7psi wastegate but it was going down to 4-5 psi and coming back in at 6psi~
still after some tuning, learning, and better understanding I was able to get 148whp on the dyno out of it.

Pretty sure now with all my leaks fixed If I were to dyno at a bar of boost I'd be around 210 or more

so far I've tuned in 150\175\200 map regions for fueling, I figure 225 is next and I"m ifft on going anymore past that to 250 on the stock bottom end.

what's controlling the fuel/spark.

I'm assuming the LINK?

MS2 PCB v3

Did the o2 sensor fall out on the blue run?

haha no, just went super rich up top again on that last area.
plus the AFR on the dyno sniffer was a point higher nearly compared to mine which I tuned off of. Just used the dyno sniffer to check overall curves match up.
I was able to do many pulls and learn how to use a dyno.