there's a cheap one for sale on mt.net, but no gauge.
if i wasnt so lazy to install my mtx-l, id sell you my lc-1 with a brand new wbo2 and the red db gauge. |
Originally Posted by MF-Brain
(Post 15735)
there's a cheap one for sale on mt.net, but no gauge.
if i wasnt so lazy to install my mtx-l, id sell you my lc-1 with a brand new wbo2 and the red db gauge. On a side note, i havent driven it at all since it ---- out. my tune was rock solid is it safe ( but not ideal) to drive for a day or so. My danger ranger is shitting a front hub, and it sounds like im ridding on like 45 super swappers going down the road. :bang: Ps. not trying to blow it up obviously. |
So it takes them a week and a half to test the wideband, everything checks out ok. :confused:get it back 3 days later, (yesterday) plug it in, still no go :mad: double and triple check everything. i have it grounded to the block and am spraying starting fluid near it to make it read, and once in a while it does and then says ---- you and goes back to not doing ----. :vash: at that point i call in, they answer and i talk to them for a bit, and they say send it all back in and we can check it all and have it back within a few weeks. i decline and hang up, i dont have like 3 weeks for the car to be down, so i tear into the harness between the o2 and the controller, its all good, decide ---- it i voided the warranty doing that anyway i removed the connector from the 02 to the harness from the equation, still doing what it was doing (a bit of work then back to nothing) :squintfinger: im so done with this wideband, its just one thing after another with it. i sent it back the day i installed it because it didnt work on arrival. the evo boost gauge has had 0 problems. ---- prosport im taking my business as far away from them as possible. :pissed:
End rant |
what are the wires off it like?
where exactly are you wiring to. be specific as possible. |
Originally Posted by MF-Brain
(Post 16134)
what are the wires off it like?
where exactly are you wiring to. be specific as possible. im to the point where im not even wanting to fix it im about to just buy a different one |
Brain, Does AEM work well with ms1 more specifically this
http://columbus.craigslist.org/pts/2947576751.html |
Originally Posted by RedTurboMiata
(Post 16136)
I took the wiring piece by piece and basically hard wired the o2 sensor to the harness out of the controller.
im to the point where im not even wanting to fix it im about to just buy a different one i want like: controller has 4 wires: red- 12v black - ground yellow - 0-5v output blue - heater ground i put the red up my ass. the black on my dick the yellow in the ms and the blue i left unplugged.... |
Originally Posted by MF-Brain
(Post 16138)
this was not specific.
i want like: controller has 4 wires: red- 12v black - ground yellow - 0-5v output blue - heater ground i put the red up my ass. the black on my dick the yellow in the ms and the blue i left unplugged.... And repeat of this Brain, Do AEM widebands work well with ms1 more specifically this one http://columbus.craigslist.org/pts/2947576751.html |
buying an lc1 off a local friend, not messing with that pos anymore.
|
give it to me. ill make it work and rub it in face.
|
All times are GMT -5. The time now is 01:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands