'01 Miata for MegaSquirt
I'm currently setting up an '01 Miata engine for use by a recently completed MegaSquirt III with a 3X Expander. My question is a basic one unique to the Miata engine. This engine has what appears to be one ignition coil for two cylinders, one connected to cylinders 1 and 4 and one coil for 2 and 3. I'm assuming these are what's called "wasted spark" coils and as such can be connected directly to the 3X card.
If this is correct then Spark A should be connected to the cylinder 1 and 4 coil and Spark B should be connected to the cylinder 2,3 coil. Am I missing something obvious? Thanks in advance, Roy |
correct sir. you should follow what y8s has been doing with his and specially the flyback mod for the VVT.
|
Where to Find?
Thanks Brain for the confirmation -
Where would I find Y8s' discussion of VVT? Roy |
maybe over at msextra.com and over at miataturbo.net
basically the vvt driver on teh ms3x needs a slight mod for the flyback or it overheats. Otherwise, I can help you with any other ms3 questions |
VVT Flyback Fix - Found It
Thanks Brain-
I found the discussion and the fix suggested by y8s. Here it is if anyone is ever interested http://www.msextra.com/forums/viewto...lyback#p279479 Cheers, Roy |
yeah its a simple mod.
|
Actually you may want to read this thread:
http://www.msextra.com/forums/viewto...enough#p309407 read from that post to the end. |
All times are GMT -5. The time now is 02:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands