Track

exactly.

YellowYata

Kind of related but if you have that much in the fenders, you may have some goodies in your blower motor. There was a lot more than this before the photo and being that it's connected to the heater core, that was plastered with debris in the little radiator fins (if you will) as well.

tbro

You would be suprised or may be not, at the amount of rubber that get caught in that little area under the guards, check it and clean it ( less weight)

Tezza

RedTurboMiata

another friendly reminder dont let your master cyl/ reservoir leak for long. makes big mess like so

hustler

lol @ all these people with fender liners.

MF-Brain

iTrader: (1)

this is what happens when you dont clean them out:

RedTurboMiata

i just broke all of the bolts on the bottom of the fender trying to clean it out. all the crap came out in a dust cloud though. now i have to figure out how to get whats left of the old bolts out.

dieselmiata

In order of use: Center punch, small drill bit, larger drill bit, machinists scribe, 8 x 1.5 tap to clean the threads up, then new bolt with antisieze. I had to do all 4 on my 95.

Track

you could try a tap out thing, or a left handed drill bit.

dieselmiata

It's worth a shot, but in my experience if the bolt is seized enough to break, the tap out will break as well.