NA (1989-1997) NA Miata discussion within. The MX5's first generation, the NA, sold over 400,000 units from 1989 to 1997.

Air Breathing Front Turn Lights

Thread Tools
 
Search this Thread
 
Old 01-24-2014, 09:26 PM
  #1  
MFz Regular
Thread Starter
 
fxpthl64's Avatar
 
Join Date: Dec 2012
Location: Irvine, CA
Posts: 90
Default Air Breathing Front Turn Lights

So these are on my 97 Miata and I am not so sure they really do any good as far as getting more cool air under the hood. I still have original un-vented lights and will re-install them if these vented units aren't doing anything! Besides, the tiny lights on the vented units are just barely visible and with a car this small I want to be able to be seen when about to make a turn!
fxpthl64 is offline  
Old 01-26-2014, 08:19 PM
  #2  
Moderator
 
sixshooter's Avatar
 
Join Date: Jul 2011
Location: Tampa, FL; Lake Jackson (Atlanta), GA
Posts: 1,902
Default

They are actually counter-productive to cooling.
sixshooter is offline  
Old 01-29-2014, 07:42 PM
  #3  
MFz Regular
Thread Starter
 
fxpthl64's Avatar
 
Join Date: Dec 2012
Location: Irvine, CA
Posts: 90
Default Air Breathing Front Turn Lights

How are these counter to cooling SixShooter? Doesn't having more air "rushing" into the engine compartment keep things a bit cooler and add more air for the engine's intake? I am not doubting what you've said just wondering what you mean.
fxpthl64 is offline  
Old 01-30-2014, 07:40 AM
  #4  
Moderator
 
sixshooter's Avatar
 
Join Date: Jul 2011
Location: Tampa, FL; Lake Jackson (Atlanta), GA
Posts: 1,902
Default

Air "rushing" around the radiator instead of through it does you no good in cooling. The pressure differential between the air in front of the bumper and the air within the engine compartment creates flow through the radiator at road speed. When you allow the air a short cut and therefore increase the pressure within the engine compartment, the radiator will perform less well.

The engine itself is not air cooled and is not designed to be air cooled. If you removed the radiator entirely and simply looped the hoses so the water flowed directly back to the water pump, took the hood off of the car entirely, and drove at highway speed in 40*F weather, the engine would overheat in just a few miles. The primary purpose of the radiator is to present a large surface area for the transfer of heat to the passing air, something the B-series block and head are not designed to do.

The Miata is susceptible to overheating with the simple removal of the stock radiator undertray and bumper mouth ducting to the radiator due to the tendency for the air to circumvent the radiator rather than to proceed through it. This is exacerbated when a turbo or supercharger is added and the amount of fuel burned and heat generated is increased. If there is ever a complaint of overheating on a Miata the first question is, "Do you still have the factory ducting and undertray in place or have they been removed?"
sixshooter is offline  
Old 02-05-2014, 08:12 PM
  #5  
MFz Regular
Thread Starter
 
fxpthl64's Avatar
 
Join Date: Dec 2012
Location: Irvine, CA
Posts: 90
Default

Thanks again SixShooter. I have taken the air-breathers out and re-installed the stock light fixtures.
fxpthl64 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CharlesE
How To...
1
07-22-2014 12:33 PM
julekpl
Miata Parts for Sale & Wanted
6
01-08-2013 08:45 AM
Eds MX5
Miata Parts for Sale & Wanted
1
11-28-2012 03:53 PM
DROPTOP
Miata Parts for Sale & Wanted
7
02-29-2012 03:35 PM



Quick Reply: Air Breathing Front Turn Lights



All times are GMT -5. The time now is 02:51 PM.