Miata Forumz - Mazda Miata Chat Forums

Miata Forumz - Mazda Miata Chat Forums (https://www.miataforumz.com/)
-   NB (1998-2005) (https://www.miataforumz.com/nb-1998-2005-7/)
-   -   Utimate in headlights (https://www.miataforumz.com/nb-1998-2005-7/utimate-headlights-738/)

Haze 02-21-2012 10:06 PM

Utimate in headlights
 
In the past I've always put the best and brightest headlights and fogs on my sports cars. It's to easy to outrun the lights on a stock setup. Also being from rural North Carolina the chances of hitting a deer are way too real. (done that) So, my MSM is the first car I've owned with projector lamps and also this would be the first time I've messed around with HID lights.

I don't want blue or purple beams just a nice white bright light.

What's the best setup? I know you can get different color temps but can you get different brightness levels? (HID)? Is heat the limiting factor? What do I do to get the brightest setup? Of course I'm only gonna use it for off-road purposes.:rolleyes::cool:

What say? I'm a total noob in this area.

Much thanks.

Mazduh 02-21-2012 10:37 PM


Originally Posted by Haze (Post 12383)
In the past I've always put the best and brightest headlights and fogs on my sports cars. It's to easy to outrun the lights on a stock setup. Also being from rural North Carolina the chances of hitting a deer are way too real. (done that) So, my MSM is the first car I've owned with projector lamps and also this would be the first time I've messed around with HID lights.

I don't want blue or purple beams just a nice white bright light.

What's the best setup? I know you can get different color temps but can you get different brightness levels? (HID)? Is heat the limiting factor? What do I do to get the brightest setup? Of course I'm only gonna use it for off-road purposes.:rolleyes::cool:

What say? I'm a total noob in this area.

Much thanks.

You've got it easy being an 04 msm. You use a 9006 bulb. Just get some 6000k's and be done. They are a nice blue tint a little over the usually oem 5000k white. If your planning on clearly seeing dear, you might wanna stay closur to white, I find with 5000k+ it gets harder and harder to pick out dark colors at night.

I picked up my set off ebay for like $30 and have been using them for about a year now with no problems.

Sidenote: Once you do HID bulbs, they will stay on when you switch to you're highbeams. So It's like double the light.

Haze 02-21-2012 10:50 PM

This is probably gonna sound stupid but can I use hids in both high and low beams? Fogs too?

Mazduh 02-21-2012 10:52 PM


Originally Posted by Haze (Post 12387)
This is probably gonna sound stupid but can I use hids in booth high and low beams? Fogs too?

Fogs and lowbeams. I'm not sure if you can in the high beams? Why would you want too? You wouldn't be able to just flick them on since HID's take a few seconds to warm up.

Haze 02-21-2012 11:10 PM


Originally Posted by Mazduh (Post 12388)
Fogs and lowbeams. I'm not sure if you can in the high beams? Why would you want too? You wouldn't be able to just flick them on since HID's take a few seconds to warm up.

Oh! Gotcha. I hadn't thought of that. :sign0184: I guess I can just get some high watt ''off road '' 75 or 100 wt bulbs for the high beams. I've got some silverstar bulbs in my truck w/oem wattage and I can tell very little diff from stock bulbs.

Do HIDs come in different wattage's (brightness)?

RedTurboMiata 02-21-2012 11:16 PM

thats the k rating, one of the few things i know about hid's lol. but i saw an hid conversion for the ranger fog lights that im considering

RedTurboMiata 02-21-2012 11:20 PM

39 Attachment(s)
the complete guide i read earlier this year


Originally Posted by Redneckstone (Post 1632691)
How-To author: Fx4wannabe01



Let the modding Begin!!

_________________________




How To Install a HID kit



Still kind of a work in progress...I hope to add different colors to this thread to show the different "K" levels that are out there.....



Are you tired of seeing this??
https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

But want this??
https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

Then this mod is for you! HID kits are very easy to install…it’s simply plug and play! No cutting or splicing needed.




First, let’s get something straight….THESE ARE NOT HIDs!!! These are simply colored Halogen replacement bulbs. If you search on eBay the term “hid”, it is gaurenteed that halogen bulbs will show up with HID on the package. DO NOT THINK that these are HIDs, because they aren’t!
https://www.miataforumz.com/attachme...ine=1329888055

This is your typical TRUE HID kit. Consists of 2 Ballasts, 2 Ballast brackets, 2 HID bulbs, ballast to bulb wire harness, stock bulb plug to ballast wire harness, 2 sets of screws/bolts for mounting Ballast bracket.
https://www.miataforumz.com/attachme...ine=1329888055

Here’s a comparison shot between a HID bulb vs. Halogen Bulb.
https://www.miataforumz.com/attachme...ine=1329888055

FOG LAMPS:

The How-To for fog lamps is generally the exact same as above. With the exception of tieing into you stock fog lamp harness.

I used a 3000k 9145 kit. 9145 is the direct fit bulb for(to my knowledge) ALL 01+ fog lamps. 9005 fits...but with a strange wiggle that I didn't not want to deal with anymore.

Ballast location depends on your kits wire lengths. Mine I had to mount somewhat close to the fogs. TrePaul86 had enough wire length to place his ballasts by the air filter and battery(inside the engine pay pretty much). I mounted mine via 3M double side sticky padded tape to the header panel. I have ran them in that same location since April 08 and it's now Nov 08 with no adverse effects due to being exposed to weather/rain/wind/hail/etc.

https://www.miataforumz.com/attachme...ine=1329888055

Driver Side:
https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

Passenger Side:
https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055


The 3000k 9145 Kit I purchased didn't come with the proper plug to plug into the stock fog harness to trigger and/or take power to power the ballast. SO....you must figure out which wire is positive and which is negative(use a test light), then snip the factory pigtail/plug from the trucks harness, and either use butt connectors or those male/female disconnects like i used...
https://www.miataforumz.com/attachme...ine=1329888055

The pretty psychodelic coated 4300k bulb also known as a 3000k HID bulb...
https://www.miataforumz.com/attachme...ine=1329888055

And the assembled fog lamp hid's...
https://www.miataforumz.com/attachme...ine=1329888055


Before & After shots:

https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

VIDEO!!
https://www.miataforumz.com/attachme...ine=1329888055


Here's some behind the wheel driving shots.....

JUST 6000k headlamps...
https://www.miataforumz.com/attachme...ine=1329888055

JUST 3000k foglamps...
https://www.miataforumz.com/attachme...ine=1329888055

BOTH 6000k headlamps AND 3000k foglamps...
https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055

https://www.miataforumz.com/attachme...ine=1329888055



__________________________________________________ ____________________________

Temperature colors...

Driver side: 4300k headlamp, 3000k foglamp
Pass. side: 6000k headlamp, 3000k foglamp
https://www.miataforumz.com/attachme...ine=1329888055



More to be added later....


RedTurboMiata 02-21-2012 11:34 PM

anyway haze the fog lights on your car would be similar to this writeup.

Haze 02-21-2012 11:43 PM

Awesome Tadd! Much thanks! If I can find a good enough deal I might just put HIDs in my Ranger too.

Mazduh 02-21-2012 11:46 PM

I sort of really dislike, maybe even hate people who put HID's in non-projector headlights...


All times are GMT -5. The time now is 02:55 PM.


© 2024 MH Sub I, LLC dba Internet Brands