jtpaintballwdp

I wonder how this turbo would spool on a 1.6. This might be in my future. Good numbers!

99mx5

Just a note: This setup is with a ported head and square-top intake.

aaronc7

any other work to head? other than just port polish.... +1 valves etc?

99mx5

The work I did on the intake ports was smooth the surfaces and removed the casting flash and remove the ridges from behind the valve seats. The exhaust ports were smoothed and the ridges behind the valve seats were also removed like the intake ports and they were polished. The combustion chambers were smoothed and polished and I removed the machining ridges from around the valve seats. Pics are in my build thread.

https://www.miataforumz.com/showpost...7&postcount=79

https://www.miataforumz.com/showpost...578&postcount=

aaronc7

Awesome, that was basically my plan as well...going to fwd those pics onto my builder.

Chiburbian

Trackspeed engineering is working on a kit that includes this turbo. They are only supporting a 1.8 however.

Allegedly this turbo spools like a 2554 and is capable of 400+ rwhp.

99mx5

It does spool quickly. When you punch it, the boost hits instantly.