My slow and probably never updated thread!
#1
My slow and probably never updated thread!
No pictures as of now - it's all just theory, talk and a garage full of random stuff to be put in.
Plans for the spring/summer:
FM's Frame Rail reinforcements - Purchased
Audio Upgrade +6 speakers and 4 tweeters (putting in tweeters into the headrest and door panel, another set of speakers into the door panels, a custom made box to fit two more speakers). Gonna run a Phoenix Gold 5 channel amp with a 10" sub. - Purchased
Pulling out the interior and trying to find a cheap solution to making it look brand new, there's some cracks on the dash - and rips in the carpet.
Rust is starting to build up around the rear quarter panel and a bit in the rocker panel - going to grind it down to metal, spray it with rust paint. Eventually paint the whole car.
New Rad (open to cost effective solutions)
New suspension (also open to suggestions - right now I'm running Racelands and they blow dick. I'm looking to run flush but not slammed, might go back to shocks & springs)
Custom exhaust - I have a 5zigen fireball muffler in my possession, I'm gonna work around that and possibly run 2.5" piping all around
Rebuilding a 1.6 (I know, going 1.8 route is "better" but I already have a spare 1.6 with low (76k) miles on it, with a tranny). At the moment my engine is at 220k~ and has a few problems - some of which are head gasket leak, slipping clutch and random coolant leaks that I just can't seem to diagnosis without pulling the motor out.
Steering Wheel (Momo)
Hard Dog Hardcore Hardtop Double Diagonal roll bar
Turboing that rebuilt 1.6 - don't have anything specific in mind, but a t25 turbo from a buddy's R32 is what I got to work with.
HKS BOV , Intercooler , Downpipe , Turbo Manifold , MegaSquirt PNP.
Thats all I got in mind for now. Will update with pictures soon!
Plans for the spring/summer:
FM's Frame Rail reinforcements - Purchased
Audio Upgrade +6 speakers and 4 tweeters (putting in tweeters into the headrest and door panel, another set of speakers into the door panels, a custom made box to fit two more speakers). Gonna run a Phoenix Gold 5 channel amp with a 10" sub. - Purchased
Pulling out the interior and trying to find a cheap solution to making it look brand new, there's some cracks on the dash - and rips in the carpet.
Rust is starting to build up around the rear quarter panel and a bit in the rocker panel - going to grind it down to metal, spray it with rust paint. Eventually paint the whole car.
New Rad (open to cost effective solutions)
New suspension (also open to suggestions - right now I'm running Racelands and they blow dick. I'm looking to run flush but not slammed, might go back to shocks & springs)
Custom exhaust - I have a 5zigen fireball muffler in my possession, I'm gonna work around that and possibly run 2.5" piping all around
Rebuilding a 1.6 (I know, going 1.8 route is "better" but I already have a spare 1.6 with low (76k) miles on it, with a tranny). At the moment my engine is at 220k~ and has a few problems - some of which are head gasket leak, slipping clutch and random coolant leaks that I just can't seem to diagnosis without pulling the motor out.
Steering Wheel (Momo)
Hard Dog Hardcore Hardtop Double Diagonal roll bar
Turboing that rebuilt 1.6 - don't have anything specific in mind, but a t25 turbo from a buddy's R32 is what I got to work with.
HKS BOV , Intercooler , Downpipe , Turbo Manifold , MegaSquirt PNP.
Thats all I got in mind for now. Will update with pictures soon!
#2
Just curious, where are you going to put the box with the last two speakers? I thought about trying to upgrade sound in my Miata but I already barely have enough room to carry an extra sweater in the car lol.
#3
I got my dad to make me two custom boxes that will fit a 6 1/2 inch speakers each. They're small enough to fit between the seat and soft top, behind the seat.
#4
Watch MT for a gently used Koyo. You see one every few months. Same for your Turbo 1.6 kit. They sell for cheap over there. As for suspension, I got the Flying Miata VMax and Sways with 949 adjustable end links and love it for it's price. I haven't experimented with other setups though. The FM rails are great, especially if your a slammed. They protect your underbody.
Rust is a bitch, I have surface rust on all bare metal bits in the engine that I'm currently wire brushing/sand blasting and then I'm going to powder coat/paint them. Salt isn't nice to metal eh?
Rust is a bitch, I have surface rust on all bare metal bits in the engine that I'm currently wire brushing/sand blasting and then I'm going to powder coat/paint them. Salt isn't nice to metal eh?
#8
To update everyone on what I've gotten to this date:
Installed on the car:
FM Frame Rails
Hard Dog Double Diagonal Roll Bar
Megan Racing Street Coilovers
K&N Air Filter (pretty much just for the noise and bling)
Rota GT3 15x7.5 wrapped w/ China tires
Greddy TiC Exhaust (2.5" piping, 4" tip, cat-back)
China brand HIDs
1.8 front brakes
Custom sound system setup + 10" Sub in the trunk
To be installed, purchased and sitting in my house:
RX7 Injectors (460cc)
HKS Turbo Timer
MegaSquirt DIY 90-93
Turbonetics t3/t4 hybrid turbo
Custom Manifold+Downpipe
Isuzu NPR Intercooler + Piping
Vibrant Intercooler (back up / spare)
Apexi Dual Chamber BOV
Spec Stage 2 Clutch + PP + 1.8 Flywheel
Spare 1.6 motor + tranny (swapping engines before putting in the turbo)
Flyin Miata Engine Rebuild Kit
I.L Motorsport Engine Mounts
GV rep front lip
Mishimoto Aluminum Radiator
To be purchased:
Wideband + other necessary gauges
R-Rear Spoiler lip
Side Skirts
SS Braided Brake Lines
Performance Pads
Aftermarket steering wheel with quick release mechanism
Sparco Sprint 5 bucket seats (still deciding which ones I want/can fit)
Paint job / Frame realignment / Rust Fix
Installed on the car:
FM Frame Rails
Hard Dog Double Diagonal Roll Bar
Megan Racing Street Coilovers
K&N Air Filter (pretty much just for the noise and bling)
Rota GT3 15x7.5 wrapped w/ China tires
Greddy TiC Exhaust (2.5" piping, 4" tip, cat-back)
China brand HIDs
1.8 front brakes
Custom sound system setup + 10" Sub in the trunk
To be installed, purchased and sitting in my house:
RX7 Injectors (460cc)
HKS Turbo Timer
MegaSquirt DIY 90-93
Turbonetics t3/t4 hybrid turbo
Custom Manifold+Downpipe
Isuzu NPR Intercooler + Piping
Vibrant Intercooler (back up / spare)
Apexi Dual Chamber BOV
Spec Stage 2 Clutch + PP + 1.8 Flywheel
Spare 1.6 motor + tranny (swapping engines before putting in the turbo)
Flyin Miata Engine Rebuild Kit
I.L Motorsport Engine Mounts
GV rep front lip
Mishimoto Aluminum Radiator
To be purchased:
Wideband + other necessary gauges
R-Rear Spoiler lip
Side Skirts
SS Braided Brake Lines
Performance Pads
Aftermarket steering wheel with quick release mechanism
Sparco Sprint 5 bucket seats (still deciding which ones I want/can fit)
Paint job / Frame realignment / Rust Fix
Thread
Thread Starter
Forum
Replies
Last Post
sixshooter
Build Threads
136
01-04-2015 08:23 PM