replaced the top hat of the driver side and smashed the original sway bar end links off the car.

 

Smashed the endlinks in a bad way?

 

no, they were stuck to the mounts on the control arm, they were worn out though. new ones tomorrow when they come in. just OE replacement.

 

New wiper blades, rotated the tires and a little MS tuning.

Is my car the only one that makes no sound when spinning it's tires? I'm wearing my rears out at twice the speed of the fronts but never leave marks. Spinning tires or stepping the back out is silent, aside from motor / exh sounds, tires are falken 912's.

I'm not saying this is a bad thing but my truck has a torsen and chirps on most corners unless going slow or not accelerating through.

 

mine does the same thing.

 

Started priming the bay for paint. After first coat dries, going to do one more then paint.

Should be done today depending on how long it takes for this junk to dry, it's hot and dry today so I'm hoping quick.

Also going to start assembling the front subframe, hoping to start fitting the engine for the harness this weekend. Will have a lot more pictures tonight in my build thread

 

I restored an early dash.

 

put the car back together, intercooler piping short about 1/2 inch. To jegs to ind what i need, and what i dont need for that matter

 

I'm really not looking forward to buying all the wire to build my harness, anyone knw where you can get wire looms of about 5 different colors on the cheap?

 

http://cgi.ebay.com/18-GAUGE-WIRE-PR...item3f088502bd
There you go, order like 3 kits you have 6 different colors of wire.